Check the Available JN0-335 Exam Dumps with 100 QA's UPDATED 2024
Download JN0-335 Exam Dumps Questions to get 100% Success in Juniper
NEW QUESTION # 11
Your network uses a single JSA host and you want to implement a cluster. In this scenario, which two statements are correct? (Choose two.)
- A. The cluster virtual IP will need an unused IP address assigned.
- B. The secondary host can backup multiple JSA primary hosts.
- C. The primary and secondary hosts must be configured with the same storage devices.
- D. The software versions on both primary and secondary hosts
Answer: A,D
Explanation:
According to the Juniper Networks JNCIP-SEC Study Guide, when setting up a cluster with a single JSA host, both the primary and secondary hosts must have the same software version installed. Additionally, an unused IP address must be assigned to the cluster virtual IP. The primary and secondary hosts do not need to be configured with the same storage devices, and the secondary host cannot be used to backup multiple JSA primary hosts.
NEW QUESTION # 12
What are two types of collectors for the JATP core engine? (Choose two.)
- A. SNMP
- B. e-mail
- C. telemetry
- D. Web
Answer: B,D
NEW QUESTION # 13
You are asked to determine how much traffic a popular gaming application is generating on your network.
Which action will you perform to accomplish this task?
- A. Enable APBR on the proper security zones
- B. Enable AppQoS on the proper security zones
- C. Enable AppTrack on the proper security zones.
- D. Enable screen options on the proper security zones
Answer: C
Explanation:
AppTrack is a feature of Juniper Networks firewall solutions that allows administrators to track applications, users, and the amount of traffic generated by those applications on the network.
AppTrack can be enabled on specific security zones of the network to monitor traffic on those zones. This feature can be used to determine how much traffic a popular gaming application is generating on the network.
AppTrack is a feature of the Junos OS that provides visibility into the applications and users on your network. It tracks the usage of applications and provides detailed reports on the amount of traffic generated by each application. By enabling AppTrack on the proper security zones, you can determine how much traffic a popular gaming application is generating on your network.
NEW QUESTION # 14
Your company is using the Juniper ATP Cloud free model. The current inspection profile is set at
10 MB You are asked to configure ATP Cloud so that executable files up to 30 MB can be scanned while at the same time minimizing the change in scan time for other file types.
Which configuration should you use in this scenario?
- A. Use the ATP Cloud Ul to change the default profile to increase the scan limit for all files to 30 MB.
- B. Use the ATP Cloud Ul to update a custom profile and increase the scan limit for executable files to 30 MB.
- C. Use the CLI to change the default profile to increase the scan limit for all files to 30 MB.
- D. Use the CLI to create a custom profile and increase the scan limit.
Answer: B
Explanation:
In this scenario, you should use the ATP Cloud Ul to create a custom profile and update the scan limit for executable files to 30 MB. This will ensure that executable files up to 30 MB can be scanned, while at the same time minimizing the change in scan time for other file types. To do this, log in to the ATP Cloud Ul and go to the Profiles tab. Click the Create button to create a new profile, and then adjust the scan limits for executable files to 30 MB. Once you have saved the custom profile, you can apply it to the desired systems and the new scan limit will be in effect.
NEW QUESTION # 15
Exhibit
When trying to set up a server protection SSL proxy, you receive the error shown. What are two reasons for this error? (Choose two.)
- A. The SSL proxy certificate ID does not have the correct renegotiation option set.
- B. The SSL proxy certificate ID is part of a blocklist.
- C. The SSL proxy certificate ID is for a forwarding proxy.
- D. The SSL proxy certificate ID does not exist.
Answer: B,D
Explanation:
Two possible reasons for this error are that the SSL proxy certificate ID does not exist, or the SSL proxy certificate ID is part of a blocklist. If the SSL proxy certificate ID does not exist, you will need to generate a new certificate. If the SSL proxy certificate ID is part of a blocklist, you will need to contact the source of the blocklist to remove it. Additionally, you may need to check that the SSL proxy certificate ID has the correct renegotiation option set, as this is necessary for proper server protection. For more information, you can refer to the Juniper Security documentation at https://www.juniper.net/documentation/en_US/junos/topics/reference/configuration-statement/security-ssl-proxy-configuration.html.
NEW QUESTION # 16
What is the correct step sequence used when Sky ATP analyzes a file?
- A. static analysis -> cache lookup -> antivirus scanning -> dynamic analysis
- B. dynamic analysis -> static analysis -> antivirus scanning -> cache lookup
- C. cache lookup -> antivirus scanning -> static analysis -> dynamic analysis
- D. cache lookup -> static analysis -> antivirus scanning -> dynamic analysis
Answer: C
NEW QUESTION # 17
You want to use Sky ATP to protect your network; however, company policy does not allow you to send any files to the cloud.
Which Sky ATP feature should you use in this situation?
- A. Only use cloud-based Sky ATP file blacklists.
- B. Only use cloud-based Sky ATP file hash lookups.
- C. Only use on-premises local Sky ATP server anti-malware file scanning.
- D. Only use on-box SRX anti-malware file scanning.
Answer: B
NEW QUESTION # 18
Exhibit
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The IP address of the authenticating domain controller is 172.25.11.140.
- B. Nancy logged in to the juniper.net Active Directory domain.
- C. The IP address of Nancy's client PC is 172.25.11.
- D. Nancy is a member of the Active Directory sales group.
Answer: A,B
Explanation:
Explanation
Based on the exhibit, Nancy logged in to the juniper.net Active Directory domain, as shown by the domain name in the user identity information. The IP address of the authenticating domain controller is 172.25.11.140, as shown by the domain controller address in the user identity information. The IP address of Nancy's client PC is not 172.25.11, but 172.25.11.11, as shown by the source IP address in the user identity information. Nancy is not a member of the Active Directory sales group, but of the marketing group, as shown by the group name in the user identity information34 References:
active-directory-access | Junos OS | Juniper Networks
13. Juniper SRX Active Directory Integration - RAYKA
Configure Juniper Identity Management Service to Obtain User Identity ...
Create an Active Directory Profile | SD Cloud | Juniper Networks
NEW QUESTION # 19
You are asked to reduce the load that the JIMS server places on your Which action should you take in this situation?
- A. Connect JIMS to the domain SQL server.
- B. Connect JIMS to another SRX Series device.
- C. Connect JIMS to the domain Exchange server
- D. Connect JIMS to the RADIUS server
Answer: C
Explanation:
Explanation
JIMS uses eventlogs on Domain contollers or Exchange Servers to determine logon events. So to decrease the load on a Domain Controller you could use the Exchange Server to read logs.
References:
Juniper Identity Management Service (JIMS) Documentation
Juniper Identity Management Service User Guide
Overview | JIMS | Juniper Networks
Juniper - ExamsBoost
Juniper Identity Management Service Overview
NEW QUESTION # 20
Which two features are configurable on Juniper Secure Analytics (JSA) to ensure that alerts are triggered when matching certain criteria? (Choose two.)
- A. building blocks
- B. events
- C. assets
- D. tests
Answer: B,D
Explanation:
The two configurable features on Juniper Secure Analytics (JSA) that can be used to ensure that alerts are triggered when matching certain criteria are events and tests. Events refer to the collection of data from different sources, while tests are used to define the criteria for which an alert is triggered. For example, you can use events to collect data from a firewall and tests to define criteria such as IP address, port number, and the type of traffic. The Security, Specialist (JNCIS-SEC) Study guide provides further information on how to configure these features on JSA.
NEW QUESTION # 21
You are asked to ensure that if the session table on your SRX Series device gets close to exhausting its resources, that you enforce a more aggress.ve age-out of existing flows. In this scenario, which two statements are correct? (Choose two.)
- A. The high-watermark configuration specifies the percentage of how much of the session table can be allocated before applying a more aggressive age-out timer
- B. The early-ageout configuration specifies the timeout value, in seconds, that will be applied once the low-watermark value is met.
- C. The early-ageout configuration specifies the timeout value, in seconds, that will be applied once the high-watermark value is met.
- D. The high-watermark configuration specifies the percentage of how much of the session table is left before disabling a more aggressive age- out timer.
Answer: A,C
Explanation:
The early-ageout configuration specifies the timeout value, in seconds, that will be applied once the high-watermark value is met. The high-watermark configuration specifies the percentage of how much of the session table can be allocated before applying a more aggressive age-out timer.
This ensures that the session table does not become full and cause traffic issues, and also ensures that existing flows are aged out quickly when the table begins to get close to being full.
NEW QUESTION # 22
Which two statements describe superflows in Juniper Secure Analytics? (Choose two.)
- A. Superflows can negatively impact licensing limitations.
- B. Disk space usage is reduced on the JSA device.
- C. Superflows combine many flows into a single flow.
- D. JSA only supports Type A and Type C superflows.
Answer: B,C
NEW QUESTION # 23
Exhibit
Using the information from the exhibit, which statement is correct?
- A. Redundancy group 1 is in an ineligible state.
- B. Redundancy group 0 is in an ineligible state.
- C. Node1 is the active node for the control plane
- D. There are no issues with the cluster.
Answer: A
NEW QUESTION # 24
After a software upgrade on an SRX5800 chassis cluster, you notice that both node0 and node1 are in the primary state, when node1 should be secondary. All control and fabric links are operating normally.
In this scenario, which step must you perform to recover the cluster?
- A. Execute the request system reboot command on node1.
- B. Execute the request system reboot command on node0.
- C. Execute the request system software add command on node1.
- D. Execute the request system software rollback command on node0.
Answer: A
NEW QUESTION # 25
You need to have the JATP solution analyzer .jar, .xls, and .doc files.
Referring to the exhibit, which two file types must be selected to accomplish this task? (Choose two.)
- A. Java
- B. library
- C. document
- D. executable
Answer: B,C
NEW QUESTION # 26
Which of the following lists the correct order that the Sky ATP pipeline evaluates traffic?
- A. Cache lookup. Antivirus Scanning, Static Analysis, Dynamic Analysis
- B. Static Analysis. Cache lookup. Antivirus Scanning, Dynamic Analysis
- C. Cache lookup. Static Analysis. Dynamic Analysis. Antivirus Scanning
Answer: A
NEW QUESTION # 27
Your JIMS server is unable to view event logs.
Which two actions would you take to solve this issue? (Choose two.)
- A. Enable the correct host-inbound-traffic rules on the SRX Series devices.
- B. Enable remote event log management within Windows Firewall on the necessary domain controllers.
- C. Enable remote event log management within Windows Firewall on the necessary Exchange servers.
- D. Enable remote event log management within Windows Firewall on the JIMS server.
Answer: B,D
Explanation:
Explanation
JIMS server is a Windows service application that collects and maintains user, device, and group information from Active Directory domains or syslog sources. JIMS server uses the Windows event logs to obtain user login and logout information from the domain controllers and Exchange servers. Therefore, to enable JIMS server to view the event logs, you need to perform the following actions:
Enable remote event log management within Windows Firewall on the necessary domain controllers and Exchange servers. This allows JIMS server to access the event logs on these servers remotely. You can do this by using the Windows Firewall with Advanced Security snap-in or by using the netsh command.
For example, to enable remote event log management on a domain controller, you can use the following command:
netsh advfirewall firewall set rule group="Remote Event Log Management" new enable=yes Enable remote event log management within Windows Firewall on the JIMS server. This allows JIMS server to receive the event logs from the domain controllers and Exchange servers. You can do this by using the same method as above. For example, to enable remote event log management on the JIMS server, you can use the following command:
netsh advfirewall firewall set rule group="Remote Event Log Management" new enable=yes Option C and Option D show the correct actions for solving this issue. Option A and Option B are incorrect because they are not related to the JIMS server's ability to view the event logs. Host-inbound-traffic rules are used to control the traffic that is allowed to reach the SRX Series devices, not the JIMS server. Enabling remote event log management on the Exchange servers is not necessary if JIMS server does not need to collect user information from them.
References: Juniper Security, Specialist (JNCIS-SEC) Reference Materials and Juniper Security, Professional (JNCIP-SEC) Reference Materials
NEW QUESTION # 28
You want to deploy vSRX in Amazon Web Services (AWS) virtual private clouds (VPCs).
Which two statements are true in this scenario? (Choose two.)
- A. MPLS LSPs can be used to connect vSRXs in different VPCs.
- B. The vSRX devices serving as local enforcement points for VPCs can be managed by a centralized Junos Space Network Director instance.
- C. The vSRX devices serving as local enforcement points for VPCs can be managed by a centralized Junos Space Security Director instance.
- D. IPsec tunnels can be used to connect vSRX in different VPCs.
Answer: C,D
NEW QUESTION # 29
What is the maximum number of supported interfaces on a vSRX hosted in a VMware environment?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 30
Which two statements are true about Juniper ATP Cloud? (Choose two.)
- A. Dynamic analysis is not always necessary to determine if a file contains malware.
- B. Dynamic analysis is always performed to determine if a file contains malware.
- C. If the cache lookup determines that a file contains malware, static analysis is not performed to verify the results.
- D. If the cache lookup determines that a file contains malware, performed to verify the results.
Answer: A,C
Explanation:
Dynamic analysis is not always necessary to determine if a file contains malware, as the ATP Cloud uses a cache lookup to quickly identify known malicious files. If the cache lookup determines that a file contains malware, static analysis is not performed to verify the results. This information can be found on the Juniper website here: https://www.juniper.net/documentation/en_US/release-independent/security/jnpr-security-srx-series/information-products/topic-collection/jnpr-security-srx-resources.html#id-jnpr-security-srx-resources-atp-cloud.
NEW QUESTION # 31
......
Juniper JN0-335 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
Best Value Available! 2024 Realistic Verified Free JN0-335 Exam Questions: https://examschief.vce4plus.com/Juniper/JN0-335-valid-vce-dumps.html